Browse Categories

Learn Watch Repair
Change a Watch Battery
Replacing Watch Bands
Make Coin Jewelry
How to Test Gold
DIY Ring Sizing

Mens Watch Bands
Womens Watch Bands
Leather Watch Bands
Metal Watch Bands
Rubber Watch Bands
Expansion Watch Bands
Diver Watch Bands

Casting

Casting precious metals requires some knowledge about the process and where mistakes can happen. People might explain casting as an easy process but as the lost wax casting steps go along, each step depends upon the previous step being error free because in the end, your results will show even small mistakes magnified greatly. The more careful you are when it comes to details, the less need there’ll be to clean up at the end. When making jewelry, by taking your time in the casting process, you will save filing or grinding time in the final stages making you final polishing much easier.
 

Displaying products 1 - 29 of 29 results
Rubber Mixing Bowl for Investment Casting
Rubber Mixing Bowl 3/4 Pint for Investment Vacuum Casting Silicone Mold Making
Your Price: $4.10
Rubber Mixing Bowl 3/4 Pint for Investment Vacuum Casting Silicone Mold Making
This .75 pint or 12 ounce rubber mixing bowl is perfect for use in casting and other jewelry making tasks. The 2.75" diameter by 4.25" heights makes it a good size for investment mixing and fits in most vacuum degassing chambers.
Casting Flask
Jewelry Making Perforated Vacuum Casting Flask 4" x 7"
Your Price: $49.95
Jewelry Making Perforated Vacuum Casting Flask 4" x 7"
Use this perforated vacuum casting flask in a vacuum casting machine. Helps allow air flow around your invested waxes which will result in less air entrapment and a more complete gold, silver or metal fill.
Sprue Base
Sprue Base For Jewelry Casting 3-3/4"
Your Price: $4.00
Sprue Base For Jewelry Casting 3-3/4"
Melt wax into the center hole and then either add a sprue or attach wax models right to the dome base. A must have for casting gold, silver and precious metal jewelry. Attaches to a solid or perforated flask.
ULTRA-VEST Dust Free Investment for Jewelry Lost Wax Casting by Ransom & Randolph (25lb or 50lb)
Your Price: Starting at $36.95
ratingratingratingratingrating
ULTRA-VEST Dust Free Investment for Jewelry Lost Wax Casting by Ransom & Randolph (25lb or 50lb)
Ultra Vest jewelry casting investment will produce quality, consistent castings. It has been formulated for lost wax casting. It is easy and smooth to mix. Will produce excellent jewelry castings and can be used for casting gold, silver, brass, bronze.
Casting Flask
Jewelry Making Casting Flasks 2" D x 2 1/2" H
Your Price: $8.10
Jewelry Making Casting Flasks 2" D x 2 1/2" H
All casting flasks are stainless steel and made for durability. Make sure that you use the correct size sprue base that attaches to the bottom of the flask to assure a leak-proof seal. Great for jewelry making and casting.
Jewelry Making Casting Flasks 4"D x 5"H
Your Price: $24.55
Jewelry Making Casting Flasks  4"D x  5"H
Heavy duty casting flasks are stainless steel and made for durability. Make sure that you use the correct size sprue base that attaches to the bottom of the flask to assure a leak-proof seal. Great for jewelry making and casting.
sprue base holder
Sprue Base Holder Holds base from 3" - 5"
Your Price: $25.85
Sprue Base Holder Holds base from 3" - 5"
This sprue base holder gives you an extra hand when working on attaching waxes to the base. Will cut your time down, which will make you a more productive jewelry maker.
Casting crucible
Jewelry Centrifugal Casting Crucible 180 dwt Capacity fits Pro Craft
Your Price: $24.30
Jewelry Centrifugal Casting Crucible 180 dwt Capacity fits Pro Craft
Centrifugal casting machine crucibles have slotted bottom to fit the Pro Craft machine. Can also be used for other type of jewelry casting machines. Will fit 9oz of silver, gold, or other casting grain that you need to melt for casting jewelry.
Casting crucibles
Jewelry Centrifugal Casting Crucible 180 dwt - 9 oz Capacity Fits Neycraft Machines
Your Price: $14.95
Jewelry Centrifugal Casting Crucible 180 dwt - 9 oz Capacity Fits Neycraft Machines
Centrifugal casting machine crucibles are to be used with jewelry casting machines. Will fit 9oz of silver, gold, or other casting grain and metals that you need to melt for casting jewelry.
NUCast
NUCast 2oz Jar
Your Price: $39.95
NUCast 2oz Jar
NuCast helps revitalize yellow gold to a new luster and shine. Just add a little to your old gold and melt. No flux needed and will help eliminate pits and porosity in jewelry casting.
Jewelry casting crucible
Jewelry Casting Crucible 3" Dia 1" Deep
Your Price: $6.90
Jewelry Casting Crucible  3" Dia 1" Deep
These fused silica crucibles have a 100 dwt capacity. Excellent for melting gold and silver.
Jewelry casting crucible
Jewelry Casting Crucible 4" Dia 1 3/8" Deep
Your Price: $6.90
Jewelry Casting Crucible 4" Dia 1 3/8" Deep
These fused silica crucibles have a 175 dwt capacity. Excellent for melting gold and silver.
Melting Dish handle with crucible
Melting Dish Handle with Crucible for Pro Cast Vacuum Machine Casting
Your Price: $22.60
Melting Dish Handle with Crucible for Pro Cast Vacuum Machine Casting
This melting dish with handle can be used with any vacuum casting application. Make sure you file a groove in the side of the crucible to help with pouring. Also melt some borax in it the first time you use it. This will help the metals slide out easy.
Replacement melting dish
Melting Dish Replacement for Pro Cast Vacuum Machine
Your Price: $8.50
Melting Dish Replacement for Pro Cast Vacuum Machine
Melting crucible is made of fused silica and clay. If you are going to use this to pour out of, make sure you file a pouring slot in the side of the dish. Also melt some borax into the dish the first time you use it. This will allow metal to slide out.
Borax Flux
Pro Craft Borax Flux 8 oz.
Your Price: $7.00
Pro Craft Borax Flux 8 oz.
Pro Craft borax powder comes in a 8 oz container. Used to make flux or as a flux with casting. Helps control oxidation during the melting process.
Griffith Borax Powder 16 oz
Griffith Borax Powder 16oz for Making Soldering & Casting Flux
Your Price: $7.40
Griffith Borax Powder 16oz for Making Soldering & Casting Flux
Griffiths borax powder comes in a 16 oz container. Used to make flux or as a flux with casting.
Spool of copper wire
Copper Wire 20 Gauge 4oz Spool
Your Price: $9.35
Copper Wire  20 Gauge 4oz Spool
Copper wire is used for making jewelry. Can also be used with plating jewelry and other metals.
Ingot Wire Mold
Ingot Wire Mold
Your Price: $12.00
Ingot Wire Mold
Used for pouring a precious metal ingot that you can mill into wire.
Portable wax pen
Portable Speedy Max Wax Pen
Your Price: $19.95
Portable Speedy Max Wax Pen
The ultimate cordless wax pen. An ideal tool for thread cutting, wax carving, repair, etc. Heats up instantly with pressure from your finger. A great portable jewelry tool that can be used anywhere. A must for the jewelry designer.
Wax carver set
Ten Piece Wax Carver Set
Your Price: $34.95
Ten Piece Wax Carver Set
Easy to use and easy to hold. Each of the 10 carvers has a PVC handle for comfortable grip while using them on wax or metal clay. The high quality stainless steel construction ensures years of life.
Reversible ingot mold
Reversible Ingot Mold
Your Price: $34.95
Reversible Ingot Mold
Make your own wire or flat stock using this reversible two-in-one ingot mold. You can save money by recycling your scrap metal and making it into usable stock.
Wax wire assortment
Round Wax Wire Assortment
Your Price: $21.10
Round Wax Wire Assortment
Twist or bend any piece of this Round Wax Wire Assortment to fit your needs. With an assortment of gauges you will have the solution.
Jewelry casting crucible
Jewelry Casting Crucible 2 1/4" Diameter 5/8" Deep
Your Price: $6.00
Jewelry Casting Crucible 2 1/4" Diameter 5/8" Deep
These fused silica crucibles have a 40 dwt capacity. Excellent for melting gold and silver.
Sprue Base
UNIVERSAL SPRUE BASES 2.5" 3" 3.5" for Jewelry Casting
Your Price: $3.50
UNIVERSAL SPRUE BASES 2.5" 3" 3.5" for Jewelry Casting
Find information on Sprue bases used for jewelry casting. These jewelry making tools fit 2.5", 3" and 3.5" flasks universally.
Jewelry Casting Tongs
Crucible and Flask Tongs Jewelry Casting Holders
Your Price: $14.95
Crucible and Flask Tongs Jewelry Casting Holders
Crucible and Flask Tongs for 1.5 inch Flasks
Carbon stirring rods
Carbon Stirring Rods for Jewelers Casting
Your Price: $8.30
Carbon Stirring Rods for Jewelers Casting
Solid carbon stirring rod for jewelers using casting, melting, and smelting of gold, silver, and other precious metals.
Sprue base for casting
Sprue Base For Jewelry Casting and Investment Each
Your Price: Starting at $2.10
Sprue Base For Jewelry Casting and Investment Each
Melt wax into the center hole and then either add a sprue or attach wax models right to the dome base. A must have for casting gold, silver and precious metal jewelry. Attaches to a solid or perforated flask
Cuttlefish Bone for Metal Casting & Mold Making (pkg/6)
Your Price: $23.65
Cuttlefish Bone for Metal Casting & Mold  Making (pkg/6)
This easy and affordable way to cast will save you time and effort. Simply press the piece your casting between the cuttlefish and your mold is ready to be poured.
15
Crucible and Flask Tongs Jewelry Casting Tool 15"
Your Price: $6.75
Crucible and Flask Tongs Jewelry Casting Tool 15"
Crucible and flask tongs for moving flasks to and from oven. Measures 15" inches in length.


Need Watch Parts?

Free Item with Qualifying Order
watch movements
bergeon tools

Google-Translate-Chinese (Simplified) BETA Google-Translate-English to French Google-Translate-English to German Google-Translate-English to Italian
Google-Translate-English to Japanese BETA Google-Translate-English to Korean BETA Google-Translate-English to Russian BETA Google-Translate-English to Spanish