TYMC Timegrapher MTG-1000 Personal Watch Timer tester

Test the performance of mechanical watches with ease. The MTG-100 tests and displays Amplitude, along with displaying on the LCD screen the beat noise, rate in seconds per day is displayed as either fast or slow and the beat error in "ms" milli-seconds is also tested. Beat rates from 18000, 19800, 21600, 25200, 28800 up to 36000 bph of mechanical watches can be tested. The beat rates are automatically identified by this tester in just a few seconds or you can change and manually set the beat rate to be tested. The lift angle is pre-set to default value of 52 degrees. If you know the correct lift angle of the watch you are testing you can manually set the correct lift angle to get the most accurate Amplitude measurement possible. Uses the standard microphone rotates to six different positions . While testing using the TYMC tester, you can hear the sound of the beat noise from a built in speaker, you can turn on and off the sound as you wish.

• single phase power supply AC110V-250V (power consumption is about 8 watts)
• Displays daily rate in seconds per day (+/-300 s/d), Accurate to (+/-1 s/d)
• Amplitude: 100 - 350 degree, allowable tolerance (+/-3 degree)
• Beat error: 0-4.0ms, allowable tolerance (+/-0.1ms)
• Life angle: 30-60 degree, ex-works value: 52 degree