Site Information

 Loading... Please wait...

Watch Case Closer & Crystal Press Tool w/ 28 Aluminum Dies

Your Price: $33.95

Product Description

This sturdy metal case closer crystal press comes with 28 aluminum dies. The 14 "upper" dies are threaded and range in sizes from 15.5mm to 37.0mm. The "lower" dies are flat and range in size from 11.0mm to 32.7mm and are not threaded. The set also includes a threaded flat die that can be used on the top mount and an adapter so that the threaded dies can also be used on the lower, unthreaded mount. The case press works well for closing snap-on or friction type watch case backs and is used for a variety of other watch servicing and repair tasks like crystal or bezel installation.

  • Watch case back press kit with 28 metal dies
  • Case press has polished chrome handle and a durable blue painted finish on the body
  • Press has a footprint of 4-1/2" x 2-1/2" inches
  • Distance between dies is 20mm with handle at rest
  • Case press threads for screw on dies measures .25" inches (6.5mm) (inside/between threads) in diameter - Outer thread diameter is 7.65mm or 0.30" inches
  • Press can be locked in any position with tightening screw
  • Set includes 14 threaded reversible deep dies (same size on each size) measuring 15.5 - 37.0mm
  • Set includes 14 flat dies measuring 11.0 - 32.7mm
  • Also includes an adapter for the bottom mount to allow threaded dies to be used on bottom

*Use a soft cloth between the watch and die to prevent scratches (Selvyt or microfiber cloths work well)