Watch Clasps, Watch Buckles and Watch Extenders

Tri-fold clasps with buttons

• These replacement clasps are for metal bands
• They fold down in three sections
• The top portion is almost as long as the bottom portion
• These clasps come with the security catch for extra protection against losing the clasp
• The push buttons are used to release the inner catch and open the clasp
• Available in stainless steel sizes: 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm
• Available in yellow sizes: 12mm, 14mm, 16mm, 18mm, 20mm

Single fold clasps with buttons

• These replacement clasps are for metal bands
• They fold down in two sections
• The top portion is half the length of the bottom portion
• The push buttons are used to release the inner catch and open the clasp
• Available in stainless steel sizes: 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm
• Available in yellow sizes: 12mm, 14mm, 16mm, 18mm, 20mm

 

Tri-fold buckles

• These replacement clasps are for metal bands
• They fold down in three sections
• The top portion is almost as long as the bottom portion
• These clasps come with the security catch for extra protection against losing the clasp
• Available in stainless steel sizes: 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm
• Available in yellow sizes: 12mm, 14mm, 16mm, 18mm, 20mm

Fold over buckle

• These replacement clasps are for metal bands
• They fold down in three sections
• The top portion is almost as long as the bottom portion
• These are the most basic no frills type of clasp
• These clasps are the considered a Citizen style
• Available in stainless steel sizes: 10mm, 12mm, 14mm, 16mm, 18mm, 20mm

Center catch clasp – open end

• These replacement clasps are for link style metal bands
• These replacement clasps can also be used for finished jewelry
• These replacement clasps have an open end that is opened slightly to fit over a permanent pin that is not removable, permanent or solid
• Nickel plated and gold plated
• Available in the following sizes: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm

Watch Band Foldover Clasp – Solid Link – Double - #302

• These replacement clasps are for link style metal bands
• These replacement clasps are used for bands where the screw or pin is removable, slide the clasp in place and put the pin back into the band
• Nickel plated and gold plated
• Available in the following sizes: 1.8mm, 2.0mm, 2.3mm, 2.8mm, 3.0mm, 3.6mm, 4.0mm, 5.0mm, 5.8mm, 6.0mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 9.8mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm, 16.0mm, 17.0mm, 18.0mm, 19.0mm, 20.0mm

 

Watch Band Foldover Clasp – Solid Link – Double - #304

• These replacement clasps are for link style metal bands
• These replacement clasps are used for bands where the screw or pin is removable, slide the clasp in place and put the pin back into the band
• These replacement clasps have a double channel for a small amount of added length
• Nickel plated and gold plated
• Available in the following sizes: 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm

Deployment Buckles

• Made to replace the regular buckle on a leather watch band.
• Deployment buckles will give a watch band a really nice finished look like some of the higher brand watches
• More secure than a standard buckle and can also provide a little extra length.
• One side attaches to the band and the other side of the band slides through the top portion and a small peg hooks into the hole in the band and clamps down.
• Nickel plated in yellow or white.
• Available in the following sizes: 14mm, 16mm, 18mm, 20mm, 22mm (White only)

 

Butterfly Buckles with Buttons

• This clasp is often called a hidden clasp as the only portion that shows are the buttons when the watch band is closed.
• The clasp is attached to the band by a tube on each side that is held into the band with pins that fit through the tube.
• The push buttons add an extra level of security so the clasp cannot open without the buttons being pushed in first.
• To determine the size clasp that you need, you measure the tube length.
• Stainless steel.
• Available in the following tube sizes: #80.319 - 4mm tube length, #80.320 - 5mm tube length, #80.3205 - 4.5mm tube length, #80.3206 - 6mm tube length, #80.3207 - 7mm tube length, #80.3208 - 8mm tube length

 

Butterfly Buckles -  No Buttons

• This clasp is often called a hidden clasp as you cannot see the clasp when it is closed.
• The clasp is attached to the band by a tube on each side that is held into the band with pins that fit through the tube.
• This is the original butterfly buckle or hidden clasp that watch companies used.
• To determine the size clasp that you need, you measure the tube length.
• Stainless steel.
• Available in the following tube sizes: #80.327 - 6.0MM tube length, #80.325 - 5.0MM tube length, #80.324 - 3.5MM tube length

Deployment Buckle with Buttons

• These buckles are made to replace the regular buckle on a leather watch band.
• Deployment buckles will give a watch band a really nice finished look like some of the higher brand watches and can also provide a little extra length. • The push buttons give this clasp the added security of not being able to open the clasp without pushing the buttons in to release the clasp.
• One side attaches to the band and then the other side of the band slides through the top portion and a small peg hooks into the hole in the band and then clamps down in the middle.
• Nickel plated white.
• Available in the following sizes: 16.0mm, 18.0mm

Buckle for Straps

• These buckles are the standard style clasp for most leather watch bands made today.
• These buckles can be easily changed to your color preference in jewelry, yellow or white.
• You can also easily change these clasps to match an outfit.
• Simply slide the spring bar through the band catching the tongue portion in the middle and insert into the clasp portion.
• Slide your band through and put the tongue into the hole that is needed to make the band fit your wrist and slide under the strap keeper to hold the end of the band in place.
• Available in yellow or white plated.
• Available in the following sizes in yellow: 6.0mm, 8.0mm, 10.0mm, 12.0mm, 13.0mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm
• Available in the following sizes in white: 6.0mm, 8.0mm, 10.0mm, 12.0mm, 13.0mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm, 24.0mm, 26.0mm, 28.0mm, 30.0mm

Butterfly Clasp  Inside Open

• This clasp is often called a hidden clasp as you cannot see the clasp when it is closed.
• The clasp is attached to the band by a tube on each side of the band that is held into the clasp with pins that fit through the band tube.
• This butterfly buckle or hidden clasp is sometimes referred to as the H style to indicate that there are no tubes on the clasp portion itself.
• To determine the size clasp that you need, you measure the opening or width between the end where the band will sit into the clasp.
• Stainless steel.
• Available in the following tube sizes: 2.0mm, 4.0mm

Foldover Clasp

• This clasp is generally used on mesh style bands and was made to easily adjust the length of the mesh band.
• To adjust the band, simply use a pliers to lift up on the forks that hold the clasp to the mesh band.
• Cut the band the desired length and fold down the forked end and clamp over the band ends holding them in place onto the mesh of the band.
• The middle piece then folds over and clamps down to hold the band together.
• Then smaller sizes up to 12.0mm has a safety chain that will help to hold the band on your wrist if it happens to pop open.
• This clasp was a very common clasp in the Seiko and Citizen style watches.
• Nickel plated in white and yellow.
• Available in the following sizes: 5.0mm, 6.0mm, 7.0mm, 8.0mm, 10.0mm, 12.0mm, 15.0mm, 16.0mm

Buckle Extender

• This is the most basic of the watch band extenders and is used to extend the length of a watch band when the links are lost or no longer available. • This extender is generally used on tri-fold clasps and was most popular in Seiko watches.
• One end fits into the clasp and the other end fits on the band, both with spring bars.
• Both sides of the extender are the same size. Nickel plated.
• Available in yellow and white.
• Available in the following sizes: 10mm, 12mm, 14mm, 16mm, 18mm, 20mm

Clasp Style Buckle Extender

• This extender is used for arthritic hands or for divers watches to open up wide to fit over the diver suit and hand or swollen knuckles and then close back down to a normal size wrist.
• This is a clasp style extender that folds over and clamps down to hold securely into place when closed.
• Available white only.
• Available in the following sizes: 12mm, 14mm, 16mm, 18mm, 20mm

Spring Loaded Buckle Extender

• This watch band extender is used to extend the length of a watch band when the links are lost or no longer available.
• This extender is generally used on tri-fold clasps and can be used on many different brands of watches.
• One end fits into the clasp and the other end fits on the band, both with spring bars.
• One side of the extender fits into the inside of the clasp and the other side is slightly wider to fit over the band.
• The band end is spring loaded for slightly extra length when putting on your wrist.
• Nickel plated.
• Available in yellow and white.
• Available in the following sizes: 10mm, 12mm, 14mm, 16mm, 18mm, 20mm

Sliding Clasp

• This clasp is normally used on mesh style bands.
• The bottom portion is adjustable and slides up and down on the band to make length adjustments.
• The top portion is soldered onto the other end of the band.
• When replacing the clasp is is important to note if your original has the single tab that will clasp down into the slide portion of the clasp.
• If not, you will need to remove the old top portion and solder the top portion on to the band.
• Nickel plated. Available in yellow and white.
• Available in the following sizes: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 14mm, 15mm, 16mm