Alarm, Calendar, GMT And 24 Hour Watch Movement Hands
$5.95
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 10 - 49 and get 5% off
- Buy 50 - 99 and get 10% off
- Buy 100 or above and get 15% off
These alarm, calendar hands are great replacements for missing, broken or if you just want to change the look of your watch hands. These hands will fit ETA®, Miyota®, Ronda® and many more movements that use the GMT, 24 hour, alarm or calendar function. This hand is sometimes also referred to as a 24 hour or GMT hand. Available in hole sizes 1.6mm, 1.7mm and 1.8mm with lengths of 13.0mm, 13.5mm and 14.0mm you should be able to easily find a replacement hand to fit your watch. The 1.7mm hole openings are commonly used on Miyota® brand watch movements. The 1.8mm hole openings are commonly used on ETA® and Omega® brand movements, while the 1.6mm hole openings are commonly used on Ronda® brand movements. Sold individually.
- Available hole openings: 1.6mm, 1.7mm and 1.8mm
- Available lengths: 13.0mm, 13.5mm and 14.0mm
- Available style options: red with a half moon at the tip, gold with a red half moon at the tip, gold with a red arrow at the tip, red with a white luminous arrow at the tip and gold with a white luminous arrow at the tip.
- 1.6mm hole openings generally fit Ronda® movements
- 1.7mm hole openings generally fit Miyota® movements
- 1.8mm hole openings generally fit the ETA® and Omega® movements
- Lengths are measured from the center of the hole to the tip of the hand
- Sold individually
*Sizes are approximate as measurements may vary slightly by gauge
**Esslinger & Co. is independent of and not affiliated with or sponsored by ETA®, Miyota®, Ronda® or Omega®. Warranty does not apply to non-genuine parts supplied by Esslinger & Co.**
