Watch Crystal Round Magnifier Mineral Glass Crystals 3.0mm Middle And 1.00mm Edge

Current Stock:

These round mineral glass crystals are domed with a flat back to allow for magnification of the watch dial. These outside domed mineral glass crystals can be glued into most watch cases or pressure fit into most plastic watch crystal gaskets. Each crystal comes with a bevel finishing on the edges to give the watch crystal a finished look in the watch case. These generic mineral glass crystals can be used to replace the fashionable crystals in name brand watches.

  • Sold individually
  • Select the size you need from the drop down menu above
  • Edges are approximately 1.00mm thick
  • Middle is approximately 3.00mm thick
  • Available from 13.0mm to 20.0mm in .50mm increments
  • Sizes 13.0 to 20.0mm are only 2.2mm in the middle
  • Available in diameters from 29.0mm to 47.0mm in .50mm increments
  • Silica is used to make these crystals scratch resistant
  • Made of hardened mineral glass to resist breakage and be long lasting
  • Edges are beveled for a finished look
  • Crystals are domed on the outside to allow for watch dial magnification
  • Easily fit most watch cases with glue or pressure fitting
  • Replaces genuine watch crystals

 *Sizes are approximate as measurements may vary slightly by gauge.