Site Information

 Loading... Please wait...

Build Your Own Watch Tool Kit

Your Price: $125.00
SKU:
99.595
Quantity:

Product Description

The official tool kit for www.buildyourownwatch.com that will give you everything you need to build your own custom made watch. This watchmakers tool set was selected by the watchmakers at Build You Own Watch for their quality and precision. All tools you need are included and with the helpful assembly videos, you should have your watch working and on in time to go out and show it to your friends. 

A must for any watchmaker of any level, beginners will love it. Anything that you may need for changing a battery like a pro, for performing minor repairs in any watch or replacing a watch band. Includes tools for polishing watch crystals, cleaning watch bands, and removing scratches from gold or silver finishes. If you are adjusting the size of your watch band, you will find everything you need here. Ideal for traveling or using in fairs, kiosks or as a hobby.  

These tools will allow you to open most any type of watch and service things like; replacing watch gaskets, replacing watch battery, replacing watch crystal, replacing watch crown, replacing watch movement, sizing watch band, replacing watch band, replacing or adjusting watch band clasp, fitting watch hands, removing watch band links, and more..

  • Jaxa-Type Case Opener - excellent for opening waterproof cases up to 34mm
  • Case Knife - for opening any dust proof case
  • Pin Pusher - for removing links from bands
  • 2mm Screwdriver - the second most needed screwdriver for watchmakers
  • 1mm Screwdriver - the first most needed screwdriver for watchmakers
  • .80mm Screwdriver - the third most needed screwdriver for watchmakers
  • Plastic Tweezers - for those very special batteries such as extra thin lithium
  • Brass Tweezers - ideal for replacing watch hands; soft enough to avoid scratching
  • AA, Anti-Mag Tweezers - suitable for assembly work, has beveled edge
  • 5(sa), Anti-Mag Tweezers - same as double A
  • Flat Nose Pliers
  • Buff Stick
  • Ball Pein Hammer - ideal for removing pins and riveting
  • Polishing Cloth - helps remove any marks from watches and jewelry
  • 100-Spring Bars- for replacing missing or damaged bars in a watch
  • Hand-Remover - takes the guessing out of removing hands from watches
  • Pin Punch - .80mm - for removing cotter pins and Movado® type pins from watches
  • Pin Punch- 1.0mm - same as punch .80 - for removing stronger, larger or rusty pins
  • Pin Vise - excellent for watch stems, ideal for using a small drill bit or small broaches
  • Hand Press
  • Fiberglass Brush - removes rust and dirt from metal surfaces and polishes
  • Spring Bar Tool - for removing hard to reach watch pins
  • Eye Loupe
  • Band Holding Block
  • Silicone Grease - a must - helps to reseal cases after changing batteries, helps keep moisture out use it always in the gasket and around the watch crown
  • Case Cushion
  • Product case size (closed): 12.9" X 8.2" X 2.5" inches (307 X 207 X 62mm)
  • Small dust blower bulb (54.135)
  • Rodico (6033)
  • 8 in 1 movement holder (59.241)
  • Watch case holder - crab style (59.0771)
  • Dial protectors (75.016)
  • Super New Glue (12.200)
  • Headband manifier with LED light and 5 lenses (29.568)
  • Lint free microfiber cleaning cloth (17.088)

 

Esslinger & Co. is independent of and not affiliated with or sponsored by Movado®. Warranty does not apply to non-genuine parts supplied by Esslinger & Co.