Case Closers

Horotec Swiss Case Press' have a reputation of being some of the highest quality watch case tools you can buy. With steel and aluminum construction they will last a lifetime. These Delrin dies are...

Hardwood stand for the Bergeon Watch Case Opener 5700. Includes screws for bench mounting.  4 screws, to be fixed on the bench Size: 9.8" x 3.75" inches (250 x 95

This 13 piece set of black synthetic dies have straight sides and are reversible. They have a 6mm threaded hole and fit the Bergeon 5500 case press. Synthetic dies for fitting watch bezels and...

The Horotec Standard Press v2 is a professional quality watch case press for installing snap-on watch case backs and case crystals. The Universal watch press uses screw-on style dies (sold...

This die set is made for 59.0794 and 59.0805 but may fit other case press' as well. This is the replacement die set of 6 nylon dies for the Watch Tool Micro Case Press (59.0794). The dies are made...

This adapter for the Horotec Medium Case Press (MSA 07.130) allows you to keep the watch bracelet attached while closing the back of the watch. A hole for the die adapter on top allows you to use...

This professional rack-press is equipped with one case holder and seven suction dies for opening and closing watches with screw-on back. With the inclusion of the suction dies, no metal-on-metal...

Hard nylon case die used to hold Rado® watch while installing the case back. Non-marring, it will not scratch and protects the crystal and crown when closing the watch. Dies fit BB style press; the...

Horotec Swiss Case Press' have a reputation of being some of the highest quality watch case tools you can buy. With steel and aluminum construction they will last a lifetime. These Delrin dies are...

This is one of the best watch back openers made with professional quality components and ability to open any screw watch back without need for additional tools. Made to open screw open type...

This set of watch press dies is designed for fitting crystals and backs on the popular extra large size watches. These extra wide dies are made of nylon and can be used in most press machines to...

This precision rack-press is provided with a small slide that allows to block or to free the toothed rack. The watchmakers thus has an exceptional tool for fitting glasses and bezels, closing watch...

This solid aluminum fixture was designed to open PP World Time® case backs. It is used with the included hand held opener. Features six steel, delrin wrapped posts to protect case back from scratches...

These delrin dies are specially made by Horotec for their watch case press line. The delrin, a type of nylon, dies offer a very strong, hard, non-marring die that won't scratch your watch back or...

Horotec Case Press' have a reputation of being some of the highest quality watch case tools you can buy. These reversible Delrin dies are specially made by Horotec for closing snap-on case backs ...

Adapter piece for the upper dies on case closing press #64.0915. Held in place with a hex screw, this part has an o-ring to hold dies in place.  Aluminum die support for snap-on dies

Replacement center shaft with attached handle for the Horotec Micropress MSA 07.105 (our #64.0905). Use to press crystals back into watches after repair. Center shaft with handle for Horotec...

Adapter piece 07.105-A for the upper dies on case closing press #64.0905. One side fits over the gasket on the "plunger" and the other side holds die in place. Dies thread on and off the adapter with...

These premium quality Horotec dies are made of tough, non marring Delrin. Set of five includes largest reversible dies: 46/48mm, 48/50mm, 52/55mm, 57/60mm and 62/65mm. Specially designed for pressing...

Aluminum dies for watch case closing are flat, have a 10mm mounting hole and fit the BB brand presses as well as our #59.700 case and crystal press. Flat aluminum dies Choo

Double sided nylon dies have one tapered side and one straight wall side. This set of 16 dies comes with 13 straight/tapered dies as well as 2 straight/flat dies and one flat die. Sizes range from...

Replacement center shaft with attached handle for the Horotec Micropress MSA 07.110 (our #64.0915). Use to press crystals back into watches after repair. Center shaft with handle for Horotec...

Black O-ring for the adapter piece for the upper dies on case closing press #64.0915. O-ring holds dies in place.  8mm outer diameter 6mm inner diameter Add to Cart

These are a "must have" for anyone who is closing watch backs on today's HUGE watches. This four piece set of aluminum dies have tapered sides and are reversible. They have a 5mm mounting hole and...

Horotec Case Press' have a reputation of being some of the highest quality watch case tools you can buy. These reversible Delrin dies are specially made by Horotec for closing snap-on case backs ...

Adapter piece for the extra large upper dies on case closing press #59.700. One side threads into press and the other side holds die in place. Dies snap on and off the adapter with ease. Aluminum...

Screw for the upper die adapter piece on case closing press #64.0901, 64.0903, 64.0905.  Holds upper adapter in place 6mm length