Dust Collectors and Motors

You'll get BIG results from this compact polisher! It features a variable speed 1/6 HP motor with pre-lubricated ball bearings and dust proof motor housing. Tapered spindles allow the use of many...

You'll get BIG results from this compact polisher! It features a variable speed 1/6 HP motor with pre-lubricated ball bearings and dust proof motor housing. Tapered spindles allow the use of many...

Steel spindles have two hexagon set screws and fit over a motor shaft diameter of 5/16". Replacement spindles for our bench polisher #47.116; Set of 2: one right, one left. Threaded portion is...

This compact polishing lathe has a high torque motor with a variable speed range from 1,000 rpm to 10,000 rpm. Its sealed motor housing keeps dust and debris out. Power indicator light is on when...

Powerful variable speed

Dust collector hood is designed to fit a jewelry dust collector to recover precious metals or remove dust particles. Made of heavy sheet metal with non skid pads on the bottom. Has 2-1/2" (64mm)...

Designed for jewelers and craftsmen, this polishing outfit is an outstanding value! Its sturdy cabinet is made from heavy gauge steel, with  a nice powder-coat paint finish. Features a powerful 350...

Expand the potential of your polishing motor with this steel holding chuck. It holds items as small as 0.60mm and up to 6.5mm; enabling you to work with a huge variety of drills, small mounted...

Designed to fit any straight shaft motor. Made with either right or left handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is...

Keep your work area clean and free of flying debris with this splash guard for your jewelers benchtop polisher when polishing and buffing. Has an adjustable clear plastic visor and rubber feet on...

Designed to fit any straight shaft motor. Made with either right or left handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is...

Foredom BL Bench Lat

Do you want to do more polishing, grinding, or sanding jobs but don't want the mess? Do you have limited space to work on your crafts, jewelry, or watches? Foredom has the answer to your needs and...

Filter for 550 Nu-Portavac   A 6” X 6” x 2” pleated cartridge filter that is reusable and replaceable, this filter will collect dust particles of .5 microns and larger.

A favorite of jewelers workshops and

Foredom

Designed to fit any straight shaft motor. Made with right handed threads (for right side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel. Choose...

A perfect addition to any bench, this work station keeps you protected and comfortable. Its large, curved acrylic shield (8" wide at top x 5" at base x 10.5" long) provides a clear view of your work...

Designed to fit any straight shaft motor. Made with left handed threads (for left side of mot

This lighted work chamber is a great addition for jewelers, dental and other lab technicians, and fabricators working with small pieces.  It keeps debris and dust contained when sanding, polishing...

Pair of motor brushes for the benchtop jewelry polishing motor (#47.116). Brushes should be checked for wear periodically. When new they are approximately 5/16" long. Replace them when they have...

Steel spindles have two hexagon set screws and fit over a motor shaft diameter of 5/16". Replacement spindles for our bench polisher #47.116. Threaded portion is 2-3/8" Total length is 3-5/8"

Left side tapered spindle for Foredom M.BL bench lathes newer than 2002 with 5/16" motor shafts. (Older models pre-2002 have 1/4" motor shafts). Use for mounting of buffs and wheels up 4" in...

Right side tapered spindle for Foredom M.BL bench lathes newer than 2002 with 5/16" motor shafts. (Older models pre-2002 have 1/4" motor shafts). Use for mounting of buffs and wheels up 4" in...

The Foredom BL Bench Lat

Steel spindles have two hexagon set screws and fit over a motor shaft diameter of 1/4". Replacement spindles for our bench polisher #47.116; Left side. Threaded portion is 2-3/8" Total length is 3