Foredom Motor Brushes Pair for Micromotor Handpiece
- SKU:
- 34.383
Description
Pair of motor brushes for H.MH-130 or H.MH-13018 in K.1030 or H-103018 Portable Micromotor Kits
Pay careful attention to the orientation of the brush curve in relation to the curve of the motor armature. The same orientation must be maintained when replacing brushes. Replace both brushes with new ones even if only one of them looks worn. Brushes should be check for wear every 200 hours of use and replaced when the brush is less than 2mm (5/64") long.
Related Products
Related Products
Foredom Flexible Shaft Lubricant Grease Tube 1 Oz MS10006
SKU: 34.346
$4.99
The flexible inner shaft should be checked, wiped clean, and re-lubricated with grease every 50 hours of use. With every 200 hours of use, the shaft should be thoroughly cleaned with solvent and...
Add to Cart
Foredom Flexible Shaft and Handpiece Lubricant MS10005 Oiler 1 Oz
SKU: 34.345
$6.49
Foredom MS10005 Oiler - motor and handpiece oil in hypodermic dispenser for lubricating foredom handpieces and flexshafts.
0.25 fluid ounces or 7.7ml of oil
Add to Cart
Bur Blade Pro Cut Lubricant
SKU: 19.928
$7.95
This Pro Cut Lubricant is just the thing that jewelers and watchmakers need around their workbench. This great lubricant can be used on burs, drills, saw blades, gravers, and most of your other...
Add to Cart
On Sale
Foredom K.1030 Portable Micromotor Kit
SKU: 34.573
$442.86
$470.53
Foredom K.1030 Portable Micromotor Kit
For high speed applications up to 30,000 rpm including light deburring of cast pieces, bright cutt
Add to Cart
Foredom Replacement S-93 Inner Shaft
SKU: 34.360
$13.95
This 39" long inner shaft comes installed and should be used to replace broken or worn shafts on these motors: M.SR, M.SRM, M.SRB M.TX, M.TXM, M.TXB
M.LX, M.LXM, M.LXB Use with outer sheaths...
Add to Cart