This Horotec watch back opener is constructed with professional quality components and ability to open any screw watch back without need for additional tools. Made to open screw open type waterproof watch backs, it features an oversized ergonomic torque handle giving this opener the power to open even the most stubborn watch backs. It is made of cast-in steel with a base and will give the professional watchmaker years of use. It features a removable case holder that slides out of the press for you to easily place the watch in the holder. After taking the case back off, simply slide the holder out of the fixture and let the holder continue to hold the watch securely during the rest of the repair. It is supplied with 4 different set of pins that fit a variety of cases as well as 4 nylon pegs. Set includes 18 total dies; 7 suction dies (40mm, 34mm, 30mm, 26mm, 23mm, 20mm and 16mm), 8 Rolex® dies (36.5mm, 34.0mm, 29.5mm, 28.3mm, 26.5mm, 22.5mm, 20.2mm and 18.5mm) and 3 Baume & Mercier® dies ( 33mm, 30mm and 25mm).
The metal dies are placed into the top portion of the opener (vise) with small thumb screws and a side screw adjusts to fit width of the watch - all very visible and adjustable before you begin to turn the opener. The spring loaded top portion can be locked down onto the watch to prevent slipping or marring of the watch back and gives ample room to move the watch on and off the opener.
- Large ergonomic top wheel (160mm) for screwing and unscrewing with no effort
- Solid steel supporting pillars covered with anti skid and ergonomic synthetic material, for right and left handed use
- Base has a removable die tray for easy selection and storage
- Removable watch holder with 12 holes for concave delrin dies and 4 holes for case lug dies
- 4 pairs of interchangeable pins (round, rectangle, knurled, curved)
- Maximum opening of case opener is about 65mm
- 7 suction dies (40mm, 34mm, 30mm, 26mm, 23mm, 20mm and 16mm)
- 8 Rolex® dies (36.5mm, 34.0mm, 29.5mm, 28.3mm, 26.5mm, 22.5mm, 20.2mm and 18.5mm)
- 3 Baume & Mercier® dies ( 33mm, 30mm and 25mm)
- Base equipped with 4 anti-skid feet
- 1 adjustable jaw holder
- Size: 160mm x 220mm x 260mm
- Made in France
Esslinger & Co. is independent of and not affiliated with or sponsored by Rolex® or Baume-Mercier®. Warranty does not apply to non-genuine parts supplied by Esslinger & Co.