Movement Tools

These are just the thing you need when you are working on changing watch hands. To protect the watch dial while you are prying the watch hands off just slide one of these thin protectors under the...

This is an excellent watch cleaner; it has a composition that has been approved by the highest quality watch brands. It is gentle enough to use on the inside of watch especially when it comes to the...

This Bergeon casing cushion has a soft, transparent, gel-like surface. Provides a firm support, especially for special shaped cases. Its base has a sticky quality giving an amazing grip on the bench...

A movement holder is an essential tool for working on and repairing watch movements and you won't find a better made movement holder then the Swiss made Bergeon 4040-P. This Bergeon movement holder...

Bergeon Mainspring Winders in right and left hand operation. Sizes available from 5.3mm to 19mm. Swiss made. Right hand has red dot and left hand has a blue dot. Right and left

A cannon pinion remover for small and large watches with lever and wooden handle that is adapted to all watch calibres.  Removes cannon pinion 

This great little tool makes it easy to set watches with indented buttons or sub setting buttons; tool also called a Moon Phase corrector tool. It features a smooth rounded tip in synthetic material...

This Bergeon casing cushion has a soft, black, gel-like surface. Provides a firm support, especially for special shaped cases. Its base has a sticky quality giving an amazing grip on the bench...

Easily fit the spring barrel cover or barrel lid back onto the barrel after replacing or servicing the mainspring with this convenient tool. Simply put the barrel with mainspring on the platform,...

This Bergeon casing cushion has a soft, transparent, gel-like surface. Provides a firm support, especially for special shaped cases. Its base has a sticky quality giving an amazing grip on the bench...

Tired of the hassle of winding a watch? All the twisting and turning with that tiny pin that is impossible to hold on to? Thanks to the Bergeon Watch Crown Winder tool you no longer have to struggle...

Brass handle holds your drum and arbor while winding a mainspring. The plunger then releases the barrel with spring from the winder. For right hand (clockwise) winders.  Brass handle for...

Tired of the hassle of winding a watch? All the twisting and turning with that tiny pin that is impossible to hold on to? Thanks to the Bergeon Watch Crown Winder tool you no longer have to struggle...

This new Bergeon mainspring winder set includes the most popular sizes of winders available from Bergeon. Each assortment includes five drums, five left hand arbors (blue dot), five right hand arbors...

Support tool allows the watchmaker to hold the bridge of balance wheels while you adjust the beat, straighten kinks in the hairspring, when adding or removing washers and more.  Balance tool for...

The 1996 Swiss watch movement holders feature high quality all metal construction. The movement holders are available in 10 sizes: 5-1/2 x 6-3/4, 6-3/4 x 8, 7-3/4, 8-3/4, 10-1/2, 11-1/2, 12, 12-1/2,...

The Bergeon 16918-TETC has an adapted blade to work specifically with the ETACHRON stud. The nut 'blade' has been shaped to fit over the stud and regulating pins. Turning the stud will change the...

This Sweep Wheel Remover was designed to allow you to remove the smallest watch sweep wheels, as well as large sweep wheels. It features three pronged jaws that will fit sweep wheels with an uneven...

Interchangeable with Bergeon drums; allows you to turn a right hand winder into a left hand winder. These arbors for mainspring winders are for left hand winding. Six sizes are available from (00) 5...

The latest addition to Bergeon's Rodico line. Designed to meet the needs of demanding professionals in the watchmaking and electronics industries, Rodico ESD offers an anti-static solution for...

RIGHT HANDED Mainspring Winders to fit ETA® and Valjoux® Calibers These mainspring winders are made to fit many different ETA® calibers. These will work for ladies and gents size movements. Swiss

A support used when cleaning the impulse pin. Holds the hairspring so you can clean the impulse pin without damaging the hairspring. No need to remove the hairspring from the balance bridge. Support...

Brass handle holds your drum and arbor while winding a mainspring. The plunger then releases the barrel with spring from the winder. For left hand (counter-clockwise)winders.  Brass handle for...

This Bergeon casing cushion has a soft, white, gel-like surface. Provides a firm support, especially for special shaped cases. Its base has a sticky quality giving an amazing grip on the bench...

This tools unique V-slot design allows you to easily remove rollers from a watch. The V-slot slips between the staff hub and roller seat. Then, if you apply slight pressure to the sides of the tool...

This set of two genuine Bergeon collet levers was designed specifically for removing hairspring collets. But, like any truly great tool, this set has several other uses too. You can use it to rotate...

Interchangeable with Bergeon drums; allows you to turn a right hand winder into a left hand winder. These arbors for mainspring winders are for left hand winding. Six sizes are available from (01) 6...

This set of two genuine Bergeon collet levers was designed specifically for removing hairspring collets. But, like any truly great tool, this set has several other uses too. You can use it to rotate...

The Bergeon 6016 watch hand puller / remover is one of the most popular watch hand tools. Its precision design and Swiss quality make it perfect for professional watchmakers and serious enthusiasts...

Bergeon's new, reversible watch case cushion has soft, non-slip synthetic material on both sides to provide a stable and protective work surface. This material provides excellent grip on the watch to...

The Bergeon 16918-EETC has an adapted blade to work specifically with the ETACHRON stud. The blade has been shaped to fit the stud allowing for removal of the stud without damaging watch components...

Movement holder made to specifically hold the ETA® 6497 and 6498 watch movements. Made of anodized aluminum, hardened and tempered steel bearing screw with polished tip and locking system. Made...

Used as a base for adjusting the watch hairspring or balance; has 11 holes. Measures 1-3/8" x 3/8" (35mm x 10mm) made of Delrin so it won't scratch or mar your work. Made in Switzerland. 11 holes...

Double ended wheel countersinks in hardened steel for watchmaking and clockmaking. Diameters include: 1.75/1.85, 2.10/2.35, 2.75/3.00, 3.40/3.80, 4.10/4.70, 5.00/5.80mm Double ended countersink...

Bergeon replacement elastomer tip for crown winding tool 31409. This replacement tip is convex on one side and concave on the other. Made of elastomer Measures approximatel

Bergeon movement holder made to specifically hold the ETA® 775X series watch movements. Made of anodized aluminum, hardened and tempered steel bearing screw with polished tip and locking system...

The Bergeon 31081-EX-7750 has an adapted blade to work specifically with the Valjoux ETA® 7750 eccentric screw. The blade has been shaped to fit the eccentric screw allowing for adjustment of the...

This Bergeon mainspring winder set includes a wide range of sizes of winders available from Bergeon. Each assortment includes 17 left handed drums and arbors and 17 right handed drums and arbors with...

This tool is designed specifically to allow watchmakers to remove or turn watch movement rollers. The unique tweezers like design features six different size holes to seat and make fine adjustments...

This precision made Bergeon tool is designed for working on watch balances. Has a variety of notches for tightening all sizes of hairspring collets and for reaming. Superb quality steel construction...