Miscellaneous Movement Tools

These are just the thing you need when you are working on changing watch hands. To protect the watch dial while you are prying the watch hands off just slide one of these thin protectors under the...

Molykote DX paste is a mineral / lithium based white grease suited for long-term lubrication for metal parts and assemblies. Recommended by ETA® for lubrication of movement calibers 251.262, 251.272,...

These latex free finger cots, cover just your fingers to make it possible for you to get all the benefit of Latex gloves without having to wear the whole glove. The finger cots prevent you from...

Used to protect components while doing a variety of watch repair. Simply place over dial, then use a lever or remover to lift off hands without scratching the dial. When removing casebacks, use your...

This handy portable tool kit includes a variety of tools for working on the newly popular over-sized watch styles. With these larger cases, crystals and bands, many standard watch tools simply will...

This great little tool makes it easy to set watches with indented buttons or sub setting buttons; tool also called a Moon Phase corrector tool. It features a smooth rounded tip in synthetic material...

Used to protect components while doing a variety of watch repair. Simply place over dial, then use a lever or remover to lift off hands without scratching the dial. When removing casebacks, use your...

Replacement broach pin for Bergeon 30209 screw extractor. Dual sided bits for extracting screws including sizes: .40/.50mm, .60/.70mm and .80/1.00mm. Solid steel construction

Used to protect components while doing a variety of watch repair. Simply place over dial, then use a lever or remover to lift off hands without scratching the dial. When removing casebacks, use your...

This tool removes broken screws from watch movement bridges and parts. Swiss made to exacting standards with solid steel construction. Includes 2 dual sided bits. Maximum opening to fit screws is 8...

This white, homogeneous grease was specially developed for use on mechanical watch parts that are subject to friction of medium pressure when mineral and synthetic lubricants break down due to...

This tools unique V-slot design allows you to easily remove rollers from a watch. The V-slot slips between the staff hub and roller seat. Then, if you apply slight pressure to the sides of the tool...

This Swiss made base is used to hold watch dials securely and safely during repair. Made of a strong, lightweight and non-marring synthetic material. The large diameter size allows plenty of space...

This is a special tool required for any repair work that you need to do on the ETAChron mechanical movement. Extractor Key is forked to make removing the stud block easy. This tool is used as an...

Used as a base for adjusting the watch hairspring or balance. Has 12 holes and center slot. Measures 1-1/2" x 1/4" (40mm x 6mm) in nickel plated brass. Swiss made. 12 holes from 0.50 to 2.70mm...

This German made watch tool is made of steel. The knurled side screw has a locking nut for precise adjusting to the cannon pinion. Made of steel Length is

Tool for turning and setting watch hairspring collets. Features a nickel-plated brass handle which is knurled for a better grip. Double sided tool, one side has a hole for setting and the other side...

Use this two part silicone molding putty when retrofitting or to "retro-fit" a replacement movement into the watch case. Simply mix equal parts of the material by hand then the compound is pressed...

Set of two Horotec collet levers for removing hairspring collets from watch movements. Can also be used to rotate the collet on the balance staff and also for watch hand removal. Nickel-plated brass...

Designed to fit the oscillating weight screw on Rolex® movement 3235. Tri-point driver has a swivel head and aluminum body. Tri-point driver for Rolex® 3235 Tapered

Used for removing watch crystals from one-piece watch cases. Available with 4 size watch case fittings:∅ 1.60 - 2.00 - 2.30 - 2.5 mm Includes key for re

Used as a base for adjusting the watch hairspring or balance; has 11 holes. Measures 1-3/8" x 3/8" (35mm x 10mm) made of Delrin so it won't scratch or mar your work. Made in Switzerland. 11 holes...

This Horotec oscillating weight bolt tool was made for the ETA® 2892/7750. This specially designed tool easily releases and locks the oscillating weight bolt of watches for you. It comes with two...

This Swiss made base is used to hold watch dials securely and safely during repair. The large diameter size allows plenty of space for dials up to 60mm. Very useful for watch repair and made of...

The Bergeon 31081-EX-7750 has an adapted blade to work specifically with the Valjoux ETA® 7750 eccentric screw. The blade has been shaped to fit the eccentric screw allowing for adjustment of the...

This tool is designed specifically to allow watchmakers to remove or turn watch movement rollers. The unique tweezers like design features six different size holes to seat and make fine adjustments...

Designed to fit the oscillating weight screw on Rolex® movement 3235. Tri-point driver has a swivel head and aluminum body. Tri-point driver for Rolex® 3235 Tapered

This precision made Bergeon tool is designed for working on watch balances. Has a variety of notches for tightening all sizes of hairspring collets and for reaming. Superb quality steel construction...

Support base for oscillating weights from Horotec. Support lets you assemble or disassemble oscillating weight bolts on ETA® or Val calibers. All metal construction. For working on oscillating...

Used to protect watch dials, hands, watch casebacks, and glass during watch repair. Flexible and strong sheets measure 45mm square and have rounded corners.  Protects watch dial, cases and other...

Bergeon tool for tightening crown, case and watch hand tubes. This tool provides even pressure around the tube to ensure that they fit firmly and evenly on the hand arbor or crown. Supplied with 18...

This Bergeon Swiss watchmakers tool is just what you need to help hold pallet fork's while adjusting or installing a pallet arbor. Features easy grip and thumb-push action. It makes pallet arbor...

Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 - 2.00 - 2.50 mm Includes key for remov

Broaches for moving and positioning hairspring collets. Nickle-plated and knurled handle. 98mm Removes watch hairspring collets Length: 3-7/8" (98mm)

Use these dies with the Horotec Die Handle Wrench (#64.360) to work on the oscillating weight bolts of the ETA® 2892 and ETA® 7750.<

A dial feet cutting blade that can be used with the Universal correcting press (64.510) from Horotec.  

Use these dies with the Horotec Die Handle Wrench (#64.360) to open the covers off Swatch battery hatches. Open Swatch® battery hatches

Designed to fit the oscillating weight screw on Rolex® movement 3235.  Tri-point driver for Rolex® 3235 Length is 4"        

These Rolex®

Universal correcting press facilitates the work of milling, drilling, tapping, deburring, chamfering, reaming, and more. A wide range of tightening chucks (P 4.5 type) can be mounted to the broach...