Miscellaneous Tools

Plastic case for holding a watch dial securely. A flexible plastic support allows for different sized dials and the point in the center of the lid keeps the dial from shifting side to side...

Clear plastic boxes have a thin polyurethane "membrane" ideal for protecting delicate parts, coins, wax models, fragile prototypes and much more. Objects are suspended between the upper and lower...

Clear plastic boxes have a thin polyurethane "membrane" ideal for protecting delicate parts, coins, wax models, fragile prototypes and much more. Objects are suspended between the upper and lower...

Dial feet are handy to have at your work bench because you never know when you may need to replace a dial foot. Find the correct match for the dial foot you need to replace. Copper watch dial...

This handy gauge is perfect for any watchmaker. This metal gauge is marked to allow you to measure your watch movements in millimeters, lignes, and allows you to gauge American watch movement sizes...

The Horotec® Turbo Tester is used for testing the mechanical side of quartz analog movements.

This new cleaning basket by Horia is Swiss made and perfect for cleaning small parts in ultrasonic cleaners. Place the small parts in the threaded basket to safely place inside the ultrasonic to keep...

This unique storage container is made of plastic and has ten compartments and a clear lid. This small parts tray is great for keeping small watch parts during a repair without taking up lots of space...

Used to protect components while doing a variety of watch repair. Simply place over dial, then use a lever or remover to lift off hands without scratching the dial. When removing casebacks, use your...

KIF Spring Shock Absorbers, Pack of 5.  Visit our Learning Center on our blog for cross reference information for KIF springs 

Clear glass alcohol cup is useful for holding alcohol, benzene and other solutions. Secure lid has a knob for easy removal and prevents dust from entering and protects solutions from evaporation. Cup...

This 150mm x 150mm cloth by Horotec is great for polishing and keeping clean your watch and jewelry repair jobs. Made of 80% polyester and 20% polyamide.  Microfiber cloth

This new cleaning basket by Horia is Swiss made and perfect for cleaning small parts in ultrasonic cleaners. Place the small parts in the threaded basket to safely place inside the ultrasonic to keep...

This Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches. To test, place the watch in the middle of...

Handy aid for watch assembly; won't mar or damage delicate parts. One end is pointed and one end is flat. Plastic sticks have more strength than other types and can be sharpened without flaking...

These Horotec pusher bits come in 7 different sizes to fit a variety of press-in pushers. The pins friction in and out of the tool and have a base diameter of 3.0mm. The available sizes are: 2.95 mm,...

This natural Arkansas bench stone is a high quality stone that can be used for sharpening knives and other cutting tools. This stone will outlast its competitors and produce a better finish than...

Handy aid for watch assembly; won't mar or damage delicate parts. Plastic sticks have more strength than other types and can be sharpened without flaking. 5-7/8" long and 4mm in diameter...

This is an assortment of 60 wrist watch copper dial feet. This assortment of dial feet is handy to have at your work bench because you never know when you may need to replace a dial foot. As this...

This 6" x 6" cloth is great for polishing and cleaning your watch and jewelry repair jobs.  Made of recycled polyester Used to remove dust, dirt and oil from surfaces<

These Kif Trior setters are designed to make it easy to place the shock springs that are used to hold jewels in settings in watches. Each different colored Kif Trior setter indicates a different...

This sharpening stone was designed to be used with our screw-driver holder #52.468. The stone is 5/8" (16mm) square. Hardwood base is very nicely finished. Holder and screwdriver sold separately.

Use these dies with the Horotec Die Handle wrench # 64.360 to fit or remove screw-on case tubes. Eight different dies to choose from including the new 2.00mm for the Omega Seamaster®. Handle sold...

Great tool for a simple extraction of two parts winding stems . The length can be adjusted with the screw. Can also be used for the lag of the crown to set hour or date. Removes crowns with split...

Used as a base for adjusting the watch hairspring or balance. Has 12 holes and center slot. Measures 1-1/2" x 1/4" (40mm x 6mm) in nickel plated brass. Swiss made. 12 holes from 0.50 to 2.70mm...

Use these dies with the Horotec Die Handle wrench # 64.360 to fit or remove screw-on watch pushers. Swiss made. Handle sold separately. Commonly used on Omega

Tool for turning and setting watch hairspring collets. Features a nickel-plated brass handle which is knurled for a better grip. Double sided tool, one side has a hole for setting and the other side...

These generic Rolex

Sometimes, trying to remove and reset friction fit push buttons without damaging the piece can seem like an impossible task. Luckily for you, you've discovered the Horotec Button Removing tool for...

Set of two Horotec collet levers for removing hairspring collets from watch movements. Can also be used to rotate the collet on the balance staff and also for watch hand removal. Nickel-plated brass...

  The Swiss made Horotec UniPolish is used to hold a watch case, bezel or caseback for polishing. Its four brass jaws hold items from the inside and adjust to size by turning tool end clockwise...

Clear plastic boxes have a thin polyurethane "membrane" ideal for protecting delicate parts, coins, wax models, fragile prototypes and much more. Objects are suspended between the upper and lower...

This Horotec watch tool was made for removing and installing chronograph pushers. Now comes with 18 interchangeable keys that fit everything from screw-on pushers and tubes, the oscillating weight...

This Horotec oscillating weight bolt tool was made for the ETA® 2892/7750. This specially designed tool easily releases and locks the oscillating weight bolt of watches for you. It comes with two...

This Swiss made base is used to hold watch dials securely and safely during repair. The large diameter size allows plenty of space for dials up to 60mm. Very useful for watch repair and made of...

This sharpening stone was designed to be used with our screw-driver holder #52.468. The stone is 5/8" (16mm) square. Hardwood base is very nicely finished. Holder and screwdriver sold separately.

Set of 4 double ended wheel countersinks in hardened steel for watchmaking and clockmaking. Diameters include: 1.80/2.10, 2.50/3.00, 3.50/4.00, 4.50/5.00mm. Double ended countersink wheel

This handy, precision tester performs a variety of tests with both open and closed watch cases on analog quartz watches. Use to determine battery status, electronic circuit and movement operation as...

Support base for oscillating weights from Horotec. Support lets you assemble or disassemble oscillating weight bolts on ETA® or Val calibers. All metal construction. For working on oscillating...

This Horotec watch tool was made for removing and installing chronograph pushers. It comes with 13 bolt fittings that fit everything from screw-on pushers and tubes, the oscillating weight bolt, to...