Foredom

Filter for 550 Nu-Portavac   A 6” X 6” x 2” pleated cartridge filter that is reusable and replaceable, this filter will collect dust particles of .5 microns and larger.

This pre-lubricated factory assembly makes it very convenient to replace the inner shaft and outer sheath of you Foredom flex shaft machine. Fits these motor series: SR, TX, LX, PGX (power graver),...

Foredom's heavy duty speed control features a cast iron housing. Solid state electronic circuitry provides smooth, variable speed throughout the speed range. It's heavier weight and non-slip material...

Flexade attachment converts a lathe, drill press or electric drill into a flex shaft machine. It is ideal for use with the Foredom Bench Lathe (47.110) which runs up to 7,000 rpm. Since the flexade...

Foredom K.1030 Portable Micromotor Kit For high speed applications up to 30,000 rpm including light deburring of cast pieces, bright cutt

A favorite of jewelers workshops and

This Foredom FX wheel adapter fits on the tapered spindle of polishing motors to fit wheels with 1" arbor holes. Designed to fit on either side of Foredom's BL, Bench Lathe polisher, but may fit...

This study flex shaft holder features a 3-piece hexagonal support rod, top safety hook rod for holding one or two motors and matching clamp for attaching to any bench top up to 2-1/4" thick. The rod...

An economical way to use your Foredom power tool as a high speed lathe for grinding, deburring, carving, sanding, and polishing work while controlling the work piece with both hands. Raise, lower, or...

This double ended screwdriver fits many of the small size screws used on motor connectors, mandrels and other products. Has both flat blade and phillips tip and pocket clip. 5" long (129mm)

Made of durable plastic, this bur holder will hold up to 52 burs of various shank sizes from 3/32" up to 1/8". Includes clear plastic cover for easy and safe storage. Base and Clear cover made of...

Foredom BL Bench Lat

The H.30® general purpose handpiece has prelubricated ball bearings that require no maintenance. Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories.  

This eliminates the mess of ha

This is a coarse cutting compound for

Standard chuck key for most Foredom handpieces and other drills. Chuck key in comfortable plastic handle that makes accessory changes easier and the key more difficult to misplace. Use with 30®, 30H,...

Rotating bur and jewelry tool holder, stores and organizes your tools.  Holds 114 - 3/32" burs.  Measures 7" wide X 4" high Inches Has a deep cen

Pair of motor brushes for H.MH-130 or H.MH-13018 in K.1030 or H-103018 Portable Micromotor Kits Pay careful attention to the orientation of the brush curve in relation to the curve of the motor...

Pair of motor brushes for Foredom BL bench lathe. Brushes should be checked for wear periodically. When new they are approximately 1/2" long. Replace them when they have worn to 1/4". Be sure to...

Pair of motor brushes for discontinued R, RB, EE and CC motors (220 volt only). Brushes should be checked for wear periodically. When new they are approximately 3/4" long. Replace them when they...

Pair of motor brushes for these models: TX, TXH, LX, LXH, L, PGX, PG Brushes should be checked for wear periodically. When new they are approximately 5/8" long. Replace them when they have worn to

Pair of motor brushes for these discontinued models: 1/8 HP Series SR, SRM, and SRB motors (not the current 1/6HP models). 115 and 230 volt 1/8HP Series S, SM, and SB motors. 115 and 230 volt 1/4...

Foredom flexible shaft rotary motors require some replacement parts and lubrication periodically, this maintenance kit has everything you need to do a tube-up on your 1/6 hp revserible SR, SRB and...

Foredom flexible shaft rotary motors require some replacement parts and lubrication periodically, this maintenance kit has everything you need to do a tube-up on your S, SB, SM and 1/8 hp SR, SRB and...

Pair of motor brushes for current 1/6 HP M.SR, M.SRM, and M.SRB reversing flex-shaft motors (Series SR SRM and SRB 1/6 hp models). Also for current M.SRH, M.SRMH and M.SRBH heavy duty reversing...

S-96A replacement Foredom motor Shaft, the shaft measures 39-1/4" inches long, key tip, inner shaft for discontinued Series EE, GG, MMG flex shaft motors and 975, 980W, 981W and 302 Vibrator. Use...

Pair of motor brushes for discontinued CC, DD and MM motors (115 / 110 volt only). Brushes should be checked for wear periodically. When new they are approximately 3/4" long. Replace them when they...

36-1/4" long, standard material outer sheath comes equipped on ALL Motors except for those listed below. Use with S-93 key tip inner shafts sold separately.

This 39" long inner shaft comes installed and should be used to replace broken or worn shafts on these motors: M.SR, M.SRM, M.SRB  M.TX, M.TXM, M.TXB M.LX, M.LXM, M.LXB Use with outer sheaths...