Watch Crystal Tools

These G-S felt buffs are used for polishing or buffing plastic watch crystals, it is designed to be used with G-S Polishing Rouge for Fancy Crystals (X004) to remove scratches in plastic crystals...

Pegwood has a variety of uses in watch repair from cleaning pivot holes to mixing and applying adhesives. Each stick is approximately 6" (150mm) in length. Set includes 3 pieces each of three...

Bergeon's glass pen cleans watch crystals, dials and hands safely-with ease! Because of its smaller tip (6mm round) and compact size, 3 3/4" long, the mini is ideal for reaching smaller areas. The...

This the set of replacement dies for the Watch Case Press (59.01200). This nylon die set includes 12 nylon dies that will not scratch or mar watch cases. The set has six flat dies and six hollow dies...

Aluminum die set replacement for case closer 59.0810. It comes with 14 reversible turned aluminum dies (pairs) which includes 14 deep dies (from 17mm to 44mm) and 14 flat dies (14mm to 42mm) that...

This Precision Horotec tool was made for closing snap back watch cases. Smaller and more compressed than the traditional Case Press, this Micropress takes up less space on your work bench without...

This compact case closer from Bergeon is great for closing snap on watch backs as well as fitting crystals. The anodized aluminum frame is sturdy and features a non slip base and two holes for bench...

Ready to make polishing your watches and jewelry pieces easier? Just use these tightly compressed wool felt buffs with different polishing compounds. These felt buffs in combination with different...

These select dies are an amazing value. Made of strong aluminum with threaded centers and nylon inserts protect the bezel of your watch. Designed for pressing on Rolex

Tired of the stress and struggle of trying to remove watch bezels? That's what we thought: now you can easily remove watch bezels without risk of damaging them. This Horotec Watch Bezel Remover is...

Use these convenient sheets to protect watch crystals (glass or plastic) from scratches, fingerprints, dust and other debris. Simply place over the crystal and the sheet "clings" securely, leaves no...

This new set of dies was created for closing case backs on really big watches! The five reversible, tapered type and three flat dies cover a range of 39mm to 60mm. Push-on style dies have a 5mm hole...

This Precision Horotec tool was made for closing snap back watch cases. Smaller and more compressed than the traditional Case Press, this Micropress MSA 07.110 takes up less space on your work bench...

These quality reversible Delrin dies are specially made for fitting large and deep domed watch crystals. The Delrin, a type of nylon, dies offer a very strong, hard, non-marring die that won't mar or...

This G-S Precision Applicator and dispenser can be filled with your choice of cement, lubricant, or other liquid. It is a great place to store your adhesives and lubricants as it is also has a...

This ro

These a

Replacement rubber joint measuring 14 x 20 x 4mm Size  .8" inches (20mm) in diameter

October BOGO! Buy a Mini Watch Press, Get a FREE Case Knife!Add Mini Press (SKU 59.0832) to your cart and automatically receive a free watchmaker's case knife (SKU 59.189). Offer ends October 31, 20

This replacement bezel remover blade fits our Horotec tools 59.180 (MSA 07.117) and 59.175.07 (MSA 07.115-F). The blade is made of stainless steel polished to a mirror finish. Sold per piece Fits...

Ready to make polishing your watches and jewelry pieces easier? Just use these tightly compressed wool felt buffs with different polishing compounds. These felt buffs in combination with different...

Used for removing watch crystals from one-piece watch cases. Available with 4 size watch case fittings:∅ 1.60 - 2.00 - 2.50 mm Includes key for remov

This crystal press was made for fitting unbreakable tension ring crystals into your watch case. The dies are reversible and made of aluminum with tapered surfaces. This tool is NOT recommended for...

Replace the original glass pen tip when used up or worn. Specially treated felt cleans and "absorbs" fingerprints. Round flat tip is 6mm in diameter. 

These quality reversible Delrin dies are specially made for closing snap-on case backs. The Delrin, a type of nylon, dies offer a very strong, hard, non-marring die that won't mar or scratch your...

Set of 9 bakelite lower stake dies that fit the Bergeon 5500 crystal press. Includes sizes: 12, 14, 16, 20, 24, 28, 32, 36, and 40mm. Lower stake dies for Bergeon crystal press 5500

Adapter piece 07.130-B for the lower dies on case closing press #64.0901, 64.0903, 64.0905. One side fits snap-on case dies and the other fits threaded dies; both sides rest in the hole on the base...

A replacement die support for use on the Bergeon 5500 crystal press. Three heights to choose from: 5mm, 21mm, or 28mm. Lower die support for 5500 crystal press

Polywatch watch protector is a shield for your watch crystal against fingerprints, dirt, sweat, and more. Watch protector offers a perfect shield and keeps your watch crystal looking brand new. Clean...

This powerful ultraviolet lamp has a4 watt bulb that provides UV light to ensure fast curing of UV glue. Lamp measure 7.5" x 5" x 3.5". Outfit includes lamp, UV glue with applicator tip, 3 mineral...

Plastic push-on dies are designed to easily press on bezels and reduce the risk of any damage to the watch case. Set contains three sizes 28mm, 33mm, and 38mm and all feature a 10mm diameter center...

This rubber blower is just what your jewelers bench needs. It is specially designed with a flat bottom that allows it to "stand" on a bench and not roll away. it allows you to finely direct the air...

Adapter piece 07.130-A for the upper dies on case closing press #64.0901, 64.0903, 64.0905. One side fits over the gasket on the "plunger" and the other side holds die in place. Dies thread on and...

A great thing to have on hand are these nylon cas

Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 - 2.00 - 2.50 mm Includes key for remov

This is a "must have" for anyone who is closing watch backs on today's large and oversized fashion watches watches. This set of six aluminum dies are reversible with screw-on style threads (fit appx...

This is

These delrin dies are specially made by Horotec for their watch case press line. The delrin, a type of nylon, dies offer a very strong, hard, non-marring die that won't scratch your watch back or...

Hardwood stand for the Bergeon Watch Case Opener 5700. Includes screws for bench mounting.  4 screws, to be fixed on the bench Size: 9.8" x 3.75" inches (250 x 95

This die set is made for 59.0794 and 59.0805 but may fit other case press' as well. This is the replacement die set of 6 nylon dies for the Watch Tool Micro Case Press (59.0794). The dies are made...