Watch Case Openers and Closers

These Horotec watch case tool pins come in 7 different styles (styles sold separately) to fit a variety of different notched, screw-on watch case backs. The pins friction in and out of the tools and...

This is a handheld flexible rubber ring from Horotec is for removing all sizes of watch bezels from 38 to 45mm. Tough enough to remove outer bezels on brand name watches but designed not to scratch...

Sold individually, these dies, made by Horotec, are designed to fit Rolex

Premium quality case openers feature stainless steel blades which taper to a razor-thin edge. The working edges measure 4mm and 10mm, with blade angled on one or both sides - four types. Larger,...

Premium quality case openers feature stainless steel blades which taper to a razor-thin edge. The working edges measure 4mm and 10mm, with blade angled on one or both sides - four types. Larger,...

This quality made tool is designed to easily open notched, screw-on watch cases and is built to last a lifetime. Its large design provides all the torque and power you will need to open any case you...

This watch case back opener and remover was designed to remove snap-on pressure type case backs easily with very little expended effort. Simply set the watch case in the holder and line the tab up...

This deluxe mini case tool easily opens and closes waterproof case backs. This mini case opener provides you the same amount of torque that a press will and uses a lot less space on your workbench...

These are the Horotec dies that were designed to help you open and close screw back watch cases and screw bezels with ease. These dies, sold individually, have a strip of special rubber-like material...

This handy tool is called a key because it can hold a large variety of dies that allow it to open many different types of screw back watch case backs. It has a large knob on the top that allows for a...

This Precision Horotec tool was made for closing snap back watch cases. Smaller and more compressed than the traditional Case Press, this Micropress takes up less space on your work bench without...

These are the Omega

These select dies are an amazing value. Made of strong aluminum with threaded centers and nylon inserts protect the bezel of your watch. Designed for pressing on Rolex

Horotec Case Press' have a reputation of being some of the highest quality watch case tools you can buy. These reversible Delrin dies are specially made by Horotec for closing snap-on case backs ...

This special die is designed to fit the Rolex

This Horotec watch back opener is constructed with professional quality components and ability to open any screw watch back without need for additional tools. Made to open screw open type waterproof...

This Precision Horotec tool was made for closing snap back watch cases. Smaller and more compressed than the traditional Case Press, this Micropress MSA 07.110 takes up less space on your work bench...

The Horotec Key and Die system is a great choice for watchmakers who regularly deal with the popular high end watch brands. They allow you to quickly and securely remove and install brand names case...

This set of 8 dies, made by Horotec, was designed to fit Rolex

Our new case back opener was developed to remove casebacks from the Rolex

Professional grade, this mid-size case closing press features a larger base to accommodate bigger watches. Oversize handle gives you more closing force. Supplied with 11 reversible, superior quality...

Horotec has expanded the case opening die set to include the Rolex® SKY Dweller(34.0mm) and SEA Dweller (36.5mm) cases. This new set of 8 dies includes the Horotec universal handle 'die key'...

Replacement pins for the Horotec snap-on watch back remover tool. Blades are sold individually and are available in 2 sizes: 2mm and 4mm. Swiss made. Fits Horotec tool # 59.175 (MSA 07.115). Dies s

This unique Horotec tool was designed to make it possible to open watch cases with ease. Just position the point of the tool between the case back and the case and push slowly. The blade will "pop"...

This is a replacement blade for the TimeLab Snap-on or pressure type case back opener remover. Blades are sold individually and measure 23.9 X 19.7 X 0.90mm and has a 4.5mm hole in the center for...

This compact watch case opener is great for opening watches with screw on case backs. With hardened steel adjustable pins and an easy to use adjusting wheel this tool will easily remove case backs...

This tool was designed to remove Snap-on case backs with ease. It can also be used to remove some bezels and remove pins from bracelet links. It is made to allow precise snap-on adjusting and the...

This set of seven Horotec dies was designed to help you open and close screw back watch cases and screw bezels. These dies have a strip of special rubber-like material along the edges that creates a...

Replacement parts for Horotec Snappy Watch Case Opener. Find the parts you need like: set of 3 blades, individual blades (5mm straight, 3.5 and 4.5mm curved blades), o-ring gasket for blade holder,...

This tool was designed to remove Snap-on case backs with ease. It can also be used to remove some bezels and remove pins from bracelet links. It is made to allow precise snap-on adjusting and the...

The Horotec Key and Die system is a great choice for watchmakers who regularly deal with the popular high end watch brands. They allow you to quickly and securely remove and install brand names case...

Adapter piece 07.130-B for the lower dies on case closing press #64.0901, 64.0903, 64.0905. One side fits snap-on case dies and the other fits threaded dies; both sides rest in the hole on the base...

Bundle the Horotec professional press with their most popular set of dies save some money! The premium quality press has a large aluminum base with two steel support columns; built for a lifetime of...

This Horotec watch back openers is constructed with professional quality components and ability to open any screw watch back without need for additional tools. Made to open screw open type waterproof...

This Precision Horotec tool was made for closing snap back watch cases. Heavy-duty Swiss design, the Horotec press MSA 07.130 is made for professional watchmakers and will last many years. Capable of...

Pair of adapters with 2 mirror polished blades made to fit Horotec Bezel Removers 59.175 and 59.179. Made to remove Snap-on case backs with ease and it can also be used to remove some bezels.

Adapter piece 07.130-A for the upper dies on case closing press #64.0901, 64.0903, 64.0905. One side fits over the gasket on the "plunger" and the other side holds die in place. Dies thread on and...

These are the Citizen

Horotec Swiss Case Press' have a reputation of being some of the highest quality watch case tools you can buy. With steel and aluminum construction they will last a lifetime. These Delrin dies are...

This case back opener is designed to open Baume-Mercier